STARS-922 Silicon Thermal Glue


Out of stock

SKU: SDR9 Category:


STARS-922, unlike general thermal grease, is sticky and is called thermal paste. Suitable for heat sinks without fixed devices, such as GPU, memory heat sinks, MOSFET heat sinks, north and south bridge heat sinks, etc. CPU chips can also be used (generally not necessary, CPU has fasteners); there are also many buyers For pasting small fans.

1. It has good conductivity and wide service temperature range(-60~200?), short term 300? high temperature.
2. The surface curing time is short, the adhesive force is strong, the storage period is long, non-toxic and solvent free.
3. It can be applied safely in elastic adhesion, heat dissipation, insulation and encapsulation in electronics, electrical appliances, instruments, LED, heat sinks and other industries.
4. It is suitable for all kinds of components, LED and heat dissipation devices which need to be bonded directly. It has high strength and fast adhesion effect.

Weight: approx. 10g
Adhesive Material type: memory.MOSFET heat sink fin heat sink. North and South Bridge etc.
Hot melt adhesive type: other
Shear strength: 1.5 (MPa)
Active use period: 10 (min)
Shelf life: 12 (months)
Solidification time: 3min 25?C
Color: White
Thermal conductivity: >;0.671W/m.k
Surface curing time: 10MIN/25?

Operation Manual:
1. When it is used, the product is directly extruded, rubbed and glued to the surface of the adhesive, and then covered immediately after the test, so as to be tried again.
2. The surface fixed speed is related to the relative humidity and temperature in the air; the higher the temperature, the faster the curing rate is, the slower the vice versa.
3. Recommended coating thickness: 0.1-0.5mm, the thinner the better.
4. Before use, please clean with solvent (such as alcohol) adhesive surface, detergents should be surface to be clean before painting.

Additional information

Weight 0.01 kg


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.