Arduino Pro Mini


Out of stock

SKU: ARD18 Category:


Arduino Pro Mini is super tiny and thin. It was designed to minimize the circuitry of Arduino based projects. This is a 5V Arduino running the 16MHz bootloader (select ‘Arduino Duemilanove w/ 328’ within the Arduino software). Arduino Pro Mini comes with unsoldered header pins so that you can solder it in any connector or wire with any orientation you need. This is good if your project have limited space and you are familiar with Arduino.

This board is really lower the cost of an Arduino. The Arduino Pro Mini is like the Arduino Mini (same pin out) but to keep the cost low, all SMD components are used, made it two layer, etc. This board can connects directly to FT232 USB-to-serial module and supports auto-reset. You might need the Straight Pin Header or Right Angle Pin Header.

*Note: You might need to purchase a serial USB converter to program this board

– ATmega328 running at 16MHz with external resonator (0.5% tolerance)
– USB connection off board
– Supports auto-reset
– 5V regulator
– Max 150mA output
– Over current protected
– Reverse polarity protected
– DC input 5V up to 12V
– On board Power and Status LEDs

– 14 Digital input / output ports RX, TX D13, D2 ~~ of,
– 2 or 8 analog input port A0 to A7
– The TTL level serial transceiver port RX / TX
– Support for external 5V ~ 12V DC power supply
– Support 9V battery-powered
– Clock frequency 16MHz
– Dimensions: 33.3 * 18.0 (mm)

Additional information

Weight 0.01 kg


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.